Tips & Techniques
Main Page Cards Scrapbook Layouts Acrylic Art Other Stamp Art Artist Trading Cards Swaps
General Techniques Video Tutorials
Events Calendar Convention Coupon Convention Photos
About Us Angel Policy Forms of Payment Privacy Policy Shipping & Returns Policy Contact Us Game Info Game Winners Links Staff Bios Blog Design Team Info Copic Markers

General Techniques

Spinner Card


Materials:

  • Card stock
  • Pop dots
  • 2 pennies
  • Ink
  • Stamps of your choice.



Directions:

  • Cut card stock 5 ¼ " X 4". This is your background.
  • Stamps and decorate background.
  • Stamp single image on scrap card stock, color and cut out.
  • Cut 2 parallel lines on background they must be ½" apart. Leaving at least 5/8 " from edges of the card stock. Remove this piece from background card stock making a slot.
  • Cut another piece of card stock 5 ½"X 4 ¼ " put aside.
  • Take one of the pennies and put a pop dot on it. Attach the second penny to the first making sure they are lined up.
  • Put pop dot on top of that penny and attach your single image you cut out.
  • Attach your background to your 5 ½ " X 4 ¼ " card stock with pop dots.
  • Insert single image into the slot, with a penny on each side of the card stock..
  • Move the card to make the image spin.



Samples (click image to see full size card and details):


Copyright Notice: All text and images are copyrighted and held by each individual person who created the text and/or created the image(s).

NOTE: ALL RIGHTS RESERVED. The text and images may not be distributed, or republished, on any form from this website without first obtaining written permission of the copyright holder(s).

Sparkle N Sprinkle
3016 E College Ave
Ruskin, Fl. 33570
Toll Free: (888) 901-9173
www.sparklensprinkle.com
e-mail: margaret@sparklensprinkle.com


Embossing Paste and Embossing Powders

by Anne Temple

shown on a Spinner Card


Anne here with a new post for you, plus a tutorial on combining embossing paste and embossing powder.  When I first saw the new Crystal Medallion rubber stamp set from Sparkle N Sprinkle, it reminded me of a kaleidoscope.  That thought process led me to create this Penny Spinner card.  (You can find the technique here).  This is a very photo intensive post, so grab a drink, sit back, and I hope you enjoy (and maybe learn a new technique along the way).

I stared off by stamping the image and coloring it with Copic markers.  I picked my colors by random and just started coloring various sections.  Next, I covered it with Super Adhesive Sheet and fussy cut out both layers.  Once it was fussy cut, I peeled off the backing from the Super Adhesive Sheet and covered the entire area with Cloud Nine velvet glitter.  This gave each individual color of my kaleidoscope lots of shimmer.

Following the directions in the tutorial, I stamped my sentiment into the punched area using VersaMark and heat setting with Gold Coastembossing powder.  The top panel was liberally spritzed with Dylusions Ink Spray (London Blue) and pop dotted above the panel cut to the same size as the top panel.  (This white cardstock panel is where you stamp your sentiment.)

 

To create the corner piece, I started out with white cardstock.  I adhered a Dreamweavers metal stencil to the cardstock and applied embossing paste over it.  While the embossing paste was still wet, I covered it with Gold Coast embossing powder.  I set this aside to dry completely (over night) before I heat set the embossing powder with a heat gun.  Once it was dry and the embossing powder was heat set, I spritzed this with more London Blue.  The cool thing about this embossing paste/embossing powder combo is that it acts like a resist.  So, once I was happy with the coverage on my spritzing, I took a paper towel and wiped off the excess ink from the raised image.  Since I wanted it at an angle, I fussy cut out the design and adhered it to my focal panel with my Crystal Medallion spinner.

Since embossing paste and stencils are making a comeback at the moment, I thought I'd create a tutorial for this embossing paste/embossing powder technique.

To get started, you'll need to gather the following supplies: embossing paste, spatula (or a used hotel key card), brass or plastic stencil, cardstock, removable tape, embossing powder, and a container of warm, soapy water.  Once you begin, you'll need to work relatively fast, so have everything ready ahead of time.

You want to start off by taping down your cardstock to your craft mat.  Lay the brass stencil on top of the cardstock in the position you'd like.  Then I tape off all four edges, so everything stays secure.  You don't want the stencil to shift while you are applying the embossing paste as it will ruin your design.

Take the back of the spatula, or anything that you can easily spread the embossing paste with, and apply over the stencil.   It's like icing a cake.  I start off with a thick layer of paste, and then as I'm smoothing it out, Im also taking off the excess.  Just place any excess back into the jar so you can use it next time.  Even though it looks like you're using a lot of paste, most of it goes back into the jar.

You can have the paste as thick or thin as you'd like.  The thicker it is, the longer it will take to dry.  Once you're happy with it and all the openings are covered with embossing paste, carefully begin peeling off the tape in the reverse order that you put them on.  This helps to keep you from jarring the stencil and ruining the design.  Use the last piece  of tape like a hinge and gently swing the stencil up off the cardstock and then peel away from your cutting mat.   (Be sure to scrap off the stencil and place the excess embossing paste back into the jar too.)

The design should have crisp,  defined edges and look something like the photo above.  As soon as you've taken the stencil off, drop it into your container of water so that the embossing paste does not dry onto the stencil.  (It's extremely hard to clean once it's dried on.)

While the embossing paste is still wet, cover it with your embossing powder.  (You can go ahead and shake off the excess embossing powder and put it back into your container.)  The next step is the hardest - you have to set it aside and let it dry completely before moving onto the next step!

While it's starting to dry, you can clean your stencil and spatula.  I just take it to a sink and clean it with soap and a soft rag.  Since it was already in the container of water, the paste stayed moist and clean up is easy-breezy.

Once the embossing paste is dry (anywhere from several hours to over night, depending on how thick a layer you put down), take your heat gun and heat set the embossing powder.  It shimmers and shines and the embossing powder doesn't rub off.   As I mentioned earlier, this works as a great resist too.

Hope this tutorial helps spark some creative juices and encourages you to try it too.




Copyright Notice: All text and images are copyrighted and held by each individual person who created the text and/or created the image(s).

NOTE: ALL RIGHTS RESERVED. The text and images may not be distributed, or republished, on any form from this website without first obtaining written permission of the copyright holder(s).

Margaret Myers

Sparkle N Sprinkle

http://www.sparklensprinkle.com/

stampnmaggie@sparklensprinkle.com

Toll free:  888-901-9173

fax:  813-642-0941

local:  813-642-0940

3106 College Ave. E. 

Ruskin FL 33570